Ball Joint
PF 800 Series
Direction Swivel Union


Design and application Data
PF 800 Series Directional swivel unions (Ball joint) are used to align those jets and nozzles that do not have a swivel base incorporated and required directional adjustment beyond 5 to 15 off centerline.

Specification Data
Directional swivel Union (Ball joint) are made from cast bronze with Teflon sealing and stainless steel fasteners.

Adjustable Flanges
PF 900 Series


Description
Adjustable Flanges are made of cast bronze, stainless steel fitted. PF 900 series Adjustment Flanges are designed to permit limited directional adjustment of spray jets or nozzles that do not have swivel bases. Maximum 5 degree of adjustment from centre line is possible.

To Adjust
Loosen bolts on opposite side to intended direction of adjustment and tighten bolt in line of intended adjustment then lock all bolts. The Adjustment Flanges are for submersed installation

Submersible Junction Box

Description
Aquascape Junction Boxes are of cast bronze, stainless steel fitted and with a Neoprene cover gasket. Outlet is NPT tapped for Aquascape ½” or ¾” NPT Cord seals and for internal and external (earth) connections.Aquacape Junction Boxes must be installed in conformance with all applicable electrical codes. The conduit connection(s) as well as cordselas must be installed with approved water sealing thread seal.

Note
• All Tapings are NPT unless specified
• Otherwise conduit number and size must be specified
• Outlets must be specified as to number and size (½” or ¾”)
• Orders without outlet specifications will be supplied with maximum number of ½” NPT outlets
• Unused openings must be closed with brass or stainless steel NPT threaded plugs



Back